Shenzhen Three Li Heng Ying Technology Co., Ltd.
Company address: No. 2266 Longgang Avenue, Longgang District, Shenzhen
Factory address: 3 building C9, Xin'an second industrial district, Xixiang street, Baoan District, Shenzhen
For all electronic products, to maintain the best experience and normal life, in the use of the process is not only to pay attention to the use of methods of daily maintenance is also essential, LED display is no exception, bobon Cheng in LED display industry for many years, during the period of treatment because of excessive use of improper use or maintenance of LED display screen the fault caused by improper, take this article to share, to facilitate the following effects of small details of the service life of LED we use in the future to avoid.
Cleaning and maintenance of LED lamp
Where conditions permit, the accumulation of dirt with a soft brush gently scrub the LED display panel, waterproof box can wipe with a towel dipped in water, for the use of environmental custom scheduled maintenance plan。
Inspection of the internal components of the box
1, if the problem parts such as damage are found to be replaced in time, especially the small parts of the steel frame structure。
2, during the early warning of natural disasters such as weather deterioration, we need to check the stability and safety of all components of the screen. If there are any problems, we should deal with them in time, so as to avoid unnecessary losses.
3. Regularly maintain the surface coating of the welding point of the product and steel structure to prevent corrosion and rust and fall off.
4. An average of at least two maintenance times a year.
Waterproof and anticorrosion inspection
Check the waterproof box regularly, the leakage and corrosion should be processed in time.
Inspection of lightning protection measures
1. Check the lightning rod and the grounding line regularly
2. After thunder and lightning, the tube should be tested. If it fails, it must be replaced in time.
3, when it rains more, it can be checked regularly.
Power supply system inspection
1, first of all, we should check whether the connection of the lines in the distribution box is rusty or loose, and the problem should be dealt with in time.
2. For the sake of safety, the grounding of the electric box must be guaranteed to be normal and regularly checked.
3, the power circuit and the signal of new roads, should also check regularly, avoid line broken skin or bitten.
4, for the whole power supply system, one year and two checks are required。
Check of LED display control system
Check the line and structure of the whole LED display system, check the equipment and box regularly, customize regular inspection to prevent it from happening outside, and find and timely rectification in the early stage of failure.
To do routine maintenance of LED is not only above, though it is very complicated, the whole process is very simple. Generally, a single person can complete the test. Large 2~3 people can also finish daily routine investigation.